DWIL Clear Gloss Top Coat Kit with Hardener & Tools
DWIL Clear Gloss Top Coat Kit with Hardener & Tools
Add a clear, high-gloss protective finish to your painted project. The transparent finish keeps the underlying color visible while helping resist everyday wear, scratches and scuffs. This is a finishing coat, not colored paint or a repair filler. Check your existing kit contents before ordering an extra topcoat.
- Finish: Transparent, high gloss.
- Kit: 1 kg (32 oz) Part A + 160 g Part B hardener, with application tools.
- Coverage: Approximately 50–70 sq. ft. with 2 coats.
Where to use it
Apply over painted tile, wood, concrete, laminate, vinyl or linoleum. No specific base-paint brand is required. The existing finish must be sound, clean, dry and ready for topcoating according to its own instructions. Test a small area first to check adhesion and appearance. Prepare and paint bare surfaces before adding this finishing layer.
Mixing and application
Remove dust, grease and loose or peeling coating. Protect nearby surfaces. Pour the entire 160 g bottle of Part B hardener into the entire 1 kg (32 oz) container of Part A and mix thoroughly. Do not use Part A without the hardener. Use the mixed coating within 12 hours. Apply with adequate ventilation and follow the protection guidance in the manual.
One kit covers approximately 50–70 sq. ft. with 2 coats. Actual coverage varies with surface texture and application. For planning, use the lower end of the range. Apply at least 2 coats with at least 2 hours between coats. Keep the surface dry for 48 hours and allow 7 days before normal use. Follow the base paint’s drying requirements as well; cool or humid conditions can slow drying.